- HOME
- PRODUCTS
- WATER / LIQUID
- ELECTRICAL
- INDUSTRIAL
- Anemometer
- Borescope
- Breath Alcohol Tester
- CO2 Meter
- Coating Thickness Meter
- Data Logger
- Distance Meter
- Gas Detector
- Infrared Thermometer
- Moisture Meter
- Partical Counter / Meter
- Stop Watch
- Thermometer
- Temperature Humidity Meter
- Thermocouple Probe
- Thermal Image Camera
- Temperature Sensor
- Ultrasonic Thickness Gauge
- Vibration Meter
- LAB
- PRODUCT CATALOG
- Global Network
- About us
PONPE 592 PH/ORP CONTROLLER
PONPE INSTUMENTS
New product
PONPE 592 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc.
More info
Features
• Design of board card modularity, for convenience of assembly and configuration.
• Isolating transmitting output, with little interference.
• Isolating RS485 communication.
• Can be pH / ORP measurement, temperature measurement, upper and
lower limit control, transmission output, RS485 communication.
• Configurable manual and auto temperature offset function.
• Configurable upper/lower limit warning and delay.
• Configurable hummer and LCD backlight switch.
| Product | pH meter, pH controller |
| Model | PONPE 592 |
| Screen size | 2.8 inch LCD |
| Measure range | pH: 0-14 pH, ±0.02pH |
| ORP: -1000 ~1000mV, ±1mV | |
| Measuring medium | Liquid |
| Input Resistance | ≥10~12Ω |
| Temp compensation | Manual/ Auto temperature compensation |
| Temperature Range | 0~100℃， NTC10K or PT1000 |
| Communication | RS485, Modbus-RTU |
| Signal output | 4-20mA, maximum loop 750Ω, 0.2%FS |
| Power supply | AC220V±10%, 50Hz |
| Relay output | 250V, 3A |