PONPE 597EC CONDUCTIVITY METER

features

-Direct changeover to
-Conductivity (µS/cm )
-Resistivity ( MΩ x cm)
-TDS measurement (ppm )
-Automatic temperature compensation
-4-20 mA Isolated Output
-IP54 water resistant and corrosion proof enclosure
-Using the setup program: user-friendly programming
-RS485 communication
-Relay output
-Large LCD display with background lighting

Specifications

-Measure variables:EC/TDS/Resistivity
-Measure range:0.01electrode： 0.02 ~ 20.00μS/cm
                      0.1electrode： 0.20 ~ 200.0μS/cm
                      1.0electrode： 2.00 ~ 2000μS/cm
                      10.0electrode： 0.02 ~ 20.00mS/cm
-Measure range for extended range controller：0.01electrode： 0.20 ~ 200.0μS/cm
                      0.1electrode： 2.00 ~ 2000μS/cm
                      0.1electrode： 0.02 ~ 20.0mS/cm
                      10.0electrode： 0.20 ~ 200.0mS/cm
-Temperature range:-10 ~130℃
-Temperature compensation:NTC10K/PT1000
-Temperature compensation： manual/automatic
-Accuracy:EC/TDS/Resistivity: ±1%FS
                      NTC10K： (-10~5℃ )±2℃；(5~60℃ )±0.2℃；(60~130℃ )±2℃
                      PT1000： (-10~5℃ )±2℃；(5~130℃ )±0.2℃
-Output Isolated 4-20mA output
                      maximum loop is 750Ω,±0.2%FS
-Communication protocol:MODBUS-RTU RS485
-Alarm relay:Pickup/Breakaway AC250V/3A
-Relative humidity:10 ~ 85%RH(No condensation)
-Operating temperature:0 ~ 60℃
-Power supply:220VAC±10% 50Hz/60Hz
-Storage conditions:Temperature： -15 ~ 65℃
                       Relative humidity： 5 ~ 95%RH(No condensation)
-Screen size:2.8 inch
-Dimension:Overall dimension: 100mm*100mm*150mm(H*W*D)
-Cutout dimension：92.5mm*92.5mm(H*W)
-Weight:0.65Kg
-Ingress protection:IP54